|Power Consumption||1800KW 2000KW 2200KW|
|Display Timer Range||0-200S|
|Working area requirde||380*380 400*500 400*600mm|
|Working pressure||8kg/square centimeter|
Operation Note: the machine should be tightly connected with the ground .
1. get ready of the power, and press the power button ,then the
power indicator is lightened .
2.adjust the temperature to right range.when the temperature
reaches the right degree,the indicator on the top of
temperature-adjuster switch off .then the following operations can
3.adjust time –controller to right time .
4.flately place the cloth on the platen ,then cover the printing
paper (please note the right surface of the paper)push the handle
down to specified point .please note that the force should be no
more than 25kg at this time , otherwise ,the handle will be
5.when the printing time is over, the buzzer noise ,then lift the
handle to where it was.
6.if you want to peel a cooled printing paper,you should brush the
paper ,then let it alone for 5-10 seconds before peel the paper .if
you want to peel the hot printing paper, you can do it immediately
after printing .successful print requires right time ,temperature
and pressure .the thickness and material of the clothes ,even the
type of printing paper affect the performance of print.( please ask
your supplier about related information of the printing paper)